Air Caster Roll Movers
Roll movers with built-in air casters for manually repositioning heavy, compact loads over short distances.
Aerofilm Systems
Embedded Air Caster Systems
Air casters embedded in a platform or frame, for permanent or semi-permanent load-moving installations.
Models
- EAC-10
- EAC-30
- EAC-60-SS
- Engineering support included
- Manufacturer warranty
Other ranges
See details
Air Jacks
Pneumatic jacks that raise a heavy assembly a controlled amount so air casters or transport dollies can be placed underneath — no crane required.
Air Planks
Low-profile beams carrying two or more air casters, for long, narrow or unevenly distributed loads.
Gap Crosser
Air casters that glide over joints and cracks, for floors that are not completely sealed.
Load Module Systems
Complete load modules with air casters for moving very heavy or large loads, with centralised control.
Neoprene Air Casters
Reinforced neoprene air casters for the heaviest loads and highest pressures, from 1,100 to 175,000 lbs.
Air Caster Roll Movers
Roll movers with built-in air casters for manually repositioning heavy, compact loads over short distances.
Air Jacks
Pneumatic jacks that raise a heavy assembly a controlled amount so air casters or transport dollies can be placed underneath — no crane required.
Air Planks
Low-profile beams carrying two or more air casters, for long, narrow or unevenly distributed loads.
Gap Crosser
Air casters that glide over joints and cracks, for floors that are not completely sealed.
Load Module Systems
Complete load modules with air casters for moving very heavy or large loads, with centralised control.
Neoprene Air Casters
Reinforced neoprene air casters for the heaviest loads and highest pressures, from 1,100 to 175,000 lbs.
Models
Specifications are being finalised — contact us to confirm the configuration for your application.
| Model | Capacity | Platform | Design | Weight |
|---|---|---|---|---|
| EAC-10 | — | — | — | — |
| EAC-30 | — | — | — | — |
| EAC-60-SS | — | — | — | — |
Product information
Embedded air caster systems build the casters into the machine itself. A set of polyurethane air casters and a built-in air control unit become part of the base, so the equipment can be floated to a new position whenever production changes.
They suit production lines, tooling and cleanrooms, where a simple construction, low maintenance and wear resistance matter. A stainless steel version is available for sensitive environments. The EAC-10, EAC-30 and EAC-60-SS cover different capacities.
Tell us about your machine and floor and our engineers will help you design the installation.
Frequently asked
Common questions before a first air caster project.
A sealed, flat and level concrete floor. Open joints, cracks and slope all increase air consumption and reduce lift. Our brochure “Air caster transport and the floor” covers the requirements in detail.